SGI Freeware 2002 November

home *** CD-ROM | disk | FTP | other *** search

/ SGI Freeware 2002 November / SGI Freeware 2002 November - Disc 3.iso / dist / fw_texinfo.idb / usr / freeware / info / info-stnd.info-1.z / info-stnd.info-1

Wrap

Text File | 2001-07-06 | 49KB | 1,181 lines

This is info-stnd.info, produced by makeinfo version 4.0 from info-stnd.texi. INFO-DIR-SECTION Texinfo documentation system START-INFO-DIR-ENTRY * Standalone info program: (info-stnd). Standalone Info-reading program. END-INFO-DIR-ENTRY This file documents GNU Info, a program for viewing the on-line formatted versions of Texinfo files. This documentation is different from the documentation for the Info reader that is part of GNU Emacs. If you do not know how to use Info, but have a working Info reader, you should read that documentation first. Copyright (C) 1992, 93, 96, 97, 98, 99 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "Copying" and "GNU General Public License" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. File: info-stnd.info, Node: Top, Next: What is Info, Up: (dir) GNU Info ******** This file documents GNU Info, a program for viewing the on-line formatted versions of Texinfo files, version 4.0. This documentation is different from the documentation for the Info reader that is part of GNU Emacs. This manual is for Info version 4.0, updated 28 September 1999. * Menu: * What is Info:: What is Info? * Invoking Info:: Options you can pass on the command line. * Cursor Commands:: Commands which move the cursor within a node. * Scrolling Commands:: Commands for moving the node around in a window. * Node Commands:: Commands for selecting a new node. * Searching Commands:: Commands for searching an Info file. * Xref Commands:: Commands for selecting cross references. * Window Commands:: Commands which manipulate multiple windows. * Printing Nodes:: How to print out the contents of a node. * Miscellaneous Commands:: A few commands that defy categories. * Variables:: How to change the default behavior of Info. * GNU Info Global Index:: Global index containing keystrokes, command names, variable names, and general concepts. File: info-stnd.info, Node: What is Info, Next: Invoking Info, Prev: Top, Up: Top What is Info? ************* "Info" is a program which is used to view Info files on an ASCII terminal. "Info files" are the result of processing Texinfo files with the program `makeinfo' or with one of the Emacs commands, such as `M-x texinfo-format-buffer'. Texinfo itself is a documentation system that uses a single source file to produce both on-line information and printed output. You can typeset and print the files that you read in Info. File: info-stnd.info, Node: Invoking Info, Next: Cursor Commands, Prev: What is Info, Up: Top Invoking Info ************* GNU Info accepts several options to control the initial node being viewed, and to specify which directories to search for Info files. Here is a template showing an invocation of GNU Info from the shell: info [OPTION]... [MENU-ITEM...] The program accepts the following options: `--apropos=STRING' Specify a string to search in every index of every Info file installed on your system. Info looks up the named STRING in all the indices it can find, prints the results to standard output, and then exits. If you are not sure which Info file explains certain issues, this option is your friend. Note that if your system has a lot of Info files installed, searching all of them might take some time. `--directory DIRECTORY-PATH' `-d DIRECTORY-PATH' Prepend DIRECTORY-PATH to the list of directory paths searched when Info needs to find a file. You may issue `--directory' multiple times; once for each directory which contains Info files. The list of directories searched by Info is constructed from the value of the environment variable `INFOPATH'; `--directory' causes the named DIRECTORY-PATH to be prepended to that list. The value of `INFOPATH' is a list of directories usually separated by a colon; on MS-DOS/MS-Windows systems, the semicolon is used. If you do not define `INFOPATH', Info uses a default path defined when Info was built as the initial list of directories. If the value of `INFOPATH' ends with a colon (or semicolon on MS-DOS/MS-Windows), the initial list of directories is constructed by appending the build-time default to the value of `INFOPATH'. `--dribble=DRIBBLE-FILE' Specify a file where all user keystrokes will be recorded. This file can be used later to replay the same sequence of commands, see the `--restore' option below. `--file FILENAME' `-f FILENAME' Specify a particular Info file to visit. By default, Info visits the file `dir'; if you use this option, Info will start with `(FILENAME)Top' as the first file and node. If FILENAME is an absolute file name, or begins with `./' or `../', Info looks for FILENAME only in the directory of the specified FILENAME, and adds the directory of FILENAME to the value of `INFOPATH'. In contrast, if FILENAME is in the form of a relative file name, but without the `./' or `../' prefix, Info will only look for it in the directories specified in `INFOPATH'. In other words, Info does _not_ treat file names which lack `./' and `../' prefix as relative to the current directory. In every directory Info tries, if FILENAME is not found, Info looks for it with a number of known extensions of Info files(1). For every known extension, Info looks for a compressed file, if a regular file isn't found. Info supports files compressed with `gzip', `bzip2', `compress' and `yabba' programs; it calls `gunzip', `bunzip2', `uncompress' and `unyabba', accordingly, to decompress such files. Compressed Info files are assumed to have `.z', `.gz', `.bz2', `.Z', or `.Y' extensions, possibly in addition to one of the known Info files extensions(2). `--help' `-h' Produces a relatively brief description of the available Info options. `--index-search STRING' After processing all command-line arguments, go to the index in the Info file and search for index entries which matche STRING. If such an entry is found, the Info session begins with displaying the node pointed to by the first matching index entry; press `,' to step through the rest of the matching entries. If no such entry exists, print `no entries found' and exit with nonzero status. This can be used from another program as a way to provide online help, or as a quick way of starting to read an Info file at a certain node when you don't know the exact name of that node. `--node NODENAME' `-n NODENAME' Specify a particular node to visit in the initial file that Info loads. This is especially useful in conjunction with `--file'(3). You may specify `--node' multiple times; for an interactive Info, each NODENAME is visited in its own window, for a non-interactive Info (such as when `--output' is given) each NODENAME is processed sequentially. `--output FILENAME' `-o FILENAME' Specify FILENAME as the name of a file to which to direct output. Each node that Info visits will be output to FILENAME instead of interactively viewed. A value of `-' for FILENAME specifies the standard output. `--restore=DRIBBLE-FILE' Read keystrokes from DRIBBLE-FILE, presumably recorded during previous Info session (see the description of the `--dribble' option above). When the keystrokes in the files are all read, Info reverts its input to the usual interactive operation. `--show-options' `--usage' `-O' This option causes Info to look for the node that describes how to invoke the program and its command-line options, and begin the session by displaying that node. It is provided to make it easier to find the most important usage information in a manual without the need to wade through complex menu hierarchies. The effect is similar to the `M-x goto-invocation' command (*note goto-invocation::) from inside Info. `--speech-friendly' `-b' On MS-DOS/MS-Windows only, this option causes Info to use standard file I/O functions for screen writes. (By default, Info uses direct writes to the video memory on these systems, for faster operation and colored display support.) This allows the speech synthesizers used by blind persons to catch the output and convert it to audible speech. `--subnodes' This option only has meaning when given in conjunction with `--output'. It means to recursively output the nodes appearing in the menus of each node being output. Menu items which resolve to external Info files are not output, and neither are menu items which are members of an index. Each node is only output once. `--version' Prints the version information of Info and exits. `--vi-keys' This option binds functions to keys differently, to emulate the key bindings of `vi' and Less. The default key bindings are generally modeled after Emacs. `MENU-ITEM' Info treats its remaining arguments as the names of menu items. The first argument is a menu item in the initial node visited (generally `dir'), the second argument is a menu item in the first argument's node, etc. You can easily move to the node of your choice by specifying the menu names which describe the path to that node. For example, info emacs buffers first selects the menu item `Emacs' in the node `(dir)Top', and then selects the menu item `Buffers' in the node `(emacs)Top'. To avoid searching the `dir' files and just show some arbitrary file, use `-f' and the filename, as in `info -f ./foo.info'. The index search and the search for the node which describes program invocation and command-line options begins _after_ processing all the command-line menu items. Therefore, the Info file searched for the index or the invocation node is the file where Info finds itself after following all the menu items given on the command line. This is so `info emacs --show-options' does what you'd expect. ---------- Footnotes ---------- (1) `.info', `-info', `/index', and `.inf'. (2) The MS-DOS version allows for the Info extension, such as `.inf', and the short compressed file extensions, such as `.z' and `.gz', to be merged into a single extension, since DOS doesn't allow more than a single dot in the basename of a file. Thus, on MS-DOS, if Info looks for `bison', file names like `bison.igz' and `bison.inz' will be found and decompressed by `gunzip'. (3) Of course, you can specify both the file and node in a `--node' command; but don't forget to escape the open and close parentheses and whitespace from the shell as in: `info --node "(emacs)Buffers"'. File: info-stnd.info, Node: Cursor Commands, Next: Scrolling Commands, Prev: Invoking Info, Up: Top Moving the Cursor ***************** Many people find that reading screens of text page by page is made easier when one is able to indicate particular pieces of text with some kind of pointing device. Since this is the case, GNU Info (both the Emacs and standalone versions) have several commands which allow you to move the cursor about the screen. The notation used in this manual to describe keystrokes is identical to the notation used within the Emacs manual, and the GNU Readline manual. *Note Character Conventions: (emacs)Characters, if you are unfamiliar with the notation(1). The following table lists the basic cursor movement commands in Info. Each entry consists of the key sequence you should type to execute the cursor movement, the `M-x'(2) command name (displayed in parentheses), and a short description of what the command does. All of the cursor motion commands can take a "numeric" argument (see *Note `universal-argument': Miscellaneous Commands. With a numeric argument, the motion commands are simply executed that many times; for example, a numeric argument of 4 given to `next-line' causes the cursor to move down 4 lines. With a negative numeric argument, the motion is reversed; an argument of -4 given to the `next-line' command would cause the cursor to move _up_ 4 lines. <C-n> (`next-line') <DOWN> (an arrow key) Move the cursor down to the next line. <C-p> (`prev-line') <UP> (an arrow key) Move the cursor up to the previous line. <C-a> (`beginning-of-line') <Home> (on DOS/Windows only) Move the cursor to the start of the current line. <C-e> (`end-of-line') <End> (on DOS/Windows only) Move the cursor to the end of the current line. <C-f> (`forward-char') <RIGHT> (an arrow key) Move the cursor forward a character. <C-b> (`backward-char') <LEFT> (an arrow key) Move the cursor backward a character. <M-f> (`forward-word') `C-<RIGHT>' (on DOS/Windows only) Move the cursor forward a word. <M-b> (`backward-word') `C-<LEFT>' (on DOS/Windows only) Move the cursor backward a word. <M-<> (`beginning-of-node') <C-<Home>> (on DOS/Windows only) <M-b>, vi-like operation Move the cursor to the start of the current node. <M->> (`end-of-node') <C-<End>> (on DOS/Windows only) <e> Move the cursor to the end of the current node. <M-r> (`move-to-window-line') Move the cursor to a specific line of the window. Without a numeric argument, `M-r' moves the cursor to the start of the line in the center of the window. With a numeric argument of N, `M-r' moves the cursor to the start of the Nth line in the window. ---------- Footnotes ---------- (1) Here's a short summary. `C-X' means press the `CTRL' key and the key X. `M-X' means press the `META' key and the key X. On many terminals th `META' key is known as the `ALT' key. `SPC' is the space bar. The other keys are usually called by the names imprinted on them. (2) `M-x' is also a command; it invokes `execute-extended-command'. *Note Executing an extended command: (emacs)M-x, for more detailed information. File: info-stnd.info, Node: Scrolling Commands, Next: Node Commands, Prev: Cursor Commands, Up: Top Moving Text Within a Window *************************** Sometimes you are looking at a screenful of text, and only part of the current paragraph you are reading is visible on the screen. The commands detailed in this section are used to shift which part of the current node is visible on the screen. Scrolling commands are bound differently when `--vi-keys' operation (*note --vi-keys::) is in effect. These key bindings are designated with "vi-like operation". <SPC> (`scroll-forward') <NEXT> (an arrow key) <C-v> <C-f>, vi-like operation <f>, vi-like operation <M-SPC>, vi-like operation Shift the text in this window up. That is, show more of the node which is currently below the bottom of the window. With a numeric argument, show that many more lines at the bottom of the window; a numeric argument of 4 would shift all of the text in the window up 4 lines (discarding the top 4 lines), and show you four new lines at the bottom of the window. Without a numeric argument, <SPC> takes the bottom two lines of the window and places them at the top of the window, redisplaying almost a completely new screenful of lines. If you are at the end of a node, SPC takes you to the "next" node, so that you can read an entire manual from start to finish by repeating SPC. The default scroll size is one screen-full, but it can be changed by invoking the (`scroll-forward-set-window') command, `z' under `--vi-keys', with a numeric argument. The <NEXT> key is known as the <PageDown> key on some keyboards. When you use <NEXT> or <PageDown> to scroll, Info never scrolls beyond the end of the current node. <z> (`scroll-forward-set-window', vi-like operation) Scroll forward, like with <SPC>, but if a numeric argument is specified, it becomes the default scroll size for subsequent `scroll-forward' and `scroll-backward' commands. <DEL> (`scroll-backward') <PREVIOUS> (arrow key) <PRIOR> (arrow key) <M-v> , vi-like operation <C-b>, vi-like operation Shift the text in this window down. The inverse of `scroll-forward'. The default scroll size can be changed by invoking the(`scroll-backward-set-window') command, `w' under `--vi-keys', with a numeric argument. <w> (`scroll-backward-set-window', vi-like operation) Scroll backward, like with <DEL>, but if a numeric argument is specified, it becomes the default scroll size for subsequent `scroll-forward' and `scroll-backward' commands. <C-n> (`down-line', vi-like operation) <C-e>, vi-like operation <RET>, vi-like operation <LFD>, vi-like operation <DOWN>, vi-like operation Scroll forward by one line. With a numeric argument, scroll forward that many lines. <C-p> (`up-line', vi-like operation) <UP>, vi-like operation <y>, vi-like operation <k>, vi-like operation <C-k>, vi-like operation <C-y>, vi-like operation Scroll backward one line. With a numeric argument, scroll backward that many lines. <d> (`scroll-half-screen-down', vi-like operation) <C-d>, vi-like operation Scroll forward by half of the screen size. With a numeric argument, scroll that many lines. If an argument is specified, it becomes the new default number of lines to scroll for subsequent `d' and `u' commands. (`scroll-half-screen-up', vi-like operation) <C-u>, vi-like operation Scroll back by half of the screen size. With a numeric argument, scroll that many lines. If an argument is specified, it becomes the new default number of lines to scroll for subsequent `u' and `d' commands. The `scroll-forward' and `scroll-backward' commands can also move forward and backward through the node structure of the file. If you press <SPC> while viewing the end of a node, or <DEL> while viewing the beginning of a node, what happens is controlled by the variable `scroll-behavior'. *Note `scroll-behavior': Variables, for more information. The <PREVIOUS> key is the <PageUp> key on many keyboards. Emacs refers to it by the name <PRIOR>. When you use <PRIOR> or <PageUp> to scroll, Info never scrolls beyond the beginning of the current node. If your keyboard lacks the <DEL> key, look for a key called <BS>, or `BackSpace', sometimes designated with an arrow which points to the left, which should perform the same function. <C-l> (`redraw-display') Redraw the display from scratch, or shift the line containing the cursor to a specified location. With no numeric argument, `C-l' clears the screen, and then redraws its entire contents. Given a numeric argument of N, the line containing the cursor is shifted so that it is on the Nth line of the window. `C-x <w>' (`toggle-wrap') Toggles the state of line wrapping in the current window. Normally, lines which are longer than the screen width "wrap", i.e., they are continued on the next line. Lines which wrap have a `\' appearing in the rightmost column of the screen. You can cause such lines to be terminated at the rightmost column by changing the state of line wrapping in the window with `C-x w'. When a line which needs more space than one screen width to display is displayed, a `$' appears in the rightmost column of the screen, and the remainder of the line is invisible. When long lines are truncated, the modeline displays the `$' character near its left edge. File: info-stnd.info, Node: Node Commands, Next: Searching Commands, Prev: Scrolling Commands, Up: Top Selecting a New Node ******************** This section details the numerous Info commands which select a new node to view in the current window. The most basic node commands are `n', `p', `u', and `l'. Note that the commands to select nodes are mapped differently when `--vi-keys' is in effect; these keybindings are designated below as "vi-like operation". When you are viewing a node, the top line of the node contains some Info "pointers" which describe where the next, previous, and up nodes are. Info uses this line to move about the node structure of the file when you use the following commands: <n> (`next-node') `C-<NEXT>' (on DOS/Windows only) `C-x <n>', vi-like operation Select the `Next' node. The <NEXT> key is known as the <PgDn> key on some keyboards. (`prev-node') `C-<PREVIOUS>' (on DOS/Windows only) Select the `Prev' node. The <PREVIOUS> key is known as the <PgUp> key on some keyboards. (`up-node') `C-<UP>' (an arrow key on DOS/Windows only) `C-x ', vi-like operation Select the `Up' node. You can easily select a node that you have already viewed in this window by using the `l' command - this name stands for "last", and actually moves backwards through the history of visited nodes for this window. This is handy when you followed a reference to another node, possibly to read about a related issue, and would like then to resume reading at the same place where you started the excursion. Each node where you press `l' is discarded from the history. Thus, by the time you get to the first node you visited in a window, the entire history of that window is discarded. <l> (`history-node') <C-<CENTER>> (on DOS/Windows only) <'>, vi-like operation Pop the most recently selected node in this window from the node history. Two additional commands make it easy to select the most commonly selected nodes; they are `t' and `d'. <t> (`top-node') <M-t>, vi-like operation Select the node `Top' in the current Info file. <d> (`dir-node') <M-d>, vi-like operation Select the directory node (i.e., the node `(dir)'). Here are some other commands which immediately result in the selection of a different node in the current window: <<> (`first-node') <g>, vi-like operation Selects the first node which appears in this file. This node is most often `Top', but it does not have to be. With a numeric argument N, select the Nth node (the first node is node 1). An argument of zero is the same as the argument of 1. <>> (`last-node') <G>, vi-like operation Select the last node which appears in this file. With a numeric argument N, select the Nth node (the first node is node 1). An argument of zero is the same as no argument, i.e., it selects the last node. <]> (`global-next-node') Move forward or down through node structure. If the node that you are currently viewing has a `Next' pointer, that node is selected. Otherwise, if this node has a menu, the first menu item is selected. If there is no `Next' and no menu, the same process is tried with the `Up' node of this node. <[> (`global-prev-node') Move backward or up through node structure. If the node that you are currently viewing has a `Prev' pointer, that node is selected. Otherwise, if the node has an `Up' pointer, that node is selected, and if it has a menu, the last item in the menu is selected. You can get the same behavior as `global-next-node' and `global-prev-node' while simply scrolling through the file with <SPC> and <DEL>; *Note `scroll-behavior': Variables, for more information. <g> (`goto-node') `C-x <g>', vi-like operation Read the name of a node and select it. While reading the node name, completion (*note completion: The Echo Area.) is only done for the nodes which reside in one of the Info files that were loaded in the current Info session; if the desired node resides in some other file, you must type the node exactly as it appears in that Info file, and you must include the Info file of the other file. For example, `g(emacs)Buffers' finds the node `Buffers' in the Info file `emacs'. <O> (`goto-invocation' Read the name of a program and look for a node in the current Info file which describes the invocation and the command-line options for that program. The default program name is derived from the name of the current Info file. This command does the same as the `--show-options' command-line option (*note --show-options::), but it also allows to specify the program name; this is important for those manuals which describe several programs. If you need to find the Invocation node of a program that is documented in another Info file, you need to visit that file before invoking `I'. For example, if you are reading the Emacs manual and want to see the command-line options of the `makeinfo' program, type `g (texinfo) <RET>' and then `I makeinfo <RET>'. If you don't know what Info file documents the command, or if invoking `I' doesn't display the right node, go to the `(dir)' node (using the `d' command) and invoke `I' from there. <G> (`menu-sequence') Read a sequence of menu entries and follow it. Info prompts for a sequence of menu items separated by commas. (Since commas are not allowed in a node name, they are a natural choice for a delimiter in a list of menu items.) Info then looks up the first item in the menu of the node `(dir)' (if the `(dir)' node cannot be found, Info uses `Top'). If such an entry is found, Info goes to the node it points to and looks up the second item in the menu of that node, etc. In other words, you can specify a complete path which descends through the menu hierarchy of a particular Info file starting at the `(dir)' node. This has the same effect as if you typed the menu item sequence on Info's command line, see *Note Info command-line arguments processing: command-line menu items. For example, G Texinfo,Overview,Reporting Bugs <RET> displays the node `Reporting Bugs' in the Texinfo manual. (You don't actually need to type the menu items in their full length, or in their exact letter-case. However, if you do type the menu items exactly, Info will find it faster.) If any of the menu items you type are not found, Info stops at the last entry it did find and reports an error. `C-x <k>' (`kill-node') Kill a node. The node name is prompted for in the echo area, with a default of the current node. "Killing" a node means that Info tries hard to forget about it, removing it from the list of history nodes kept for the window where that node is found. Another node is selected in the window which contained the killed node. `C-x C-f' (`view-file') Read the name of a file and selects the entire file. The command `C-x C-f FILENAME' is equivalent to typing `g(FILENAME)*' `C-x C-b' (`list-visited-nodes') Make a window containing a menu of all of the currently visited nodes. This window becomes the selected window, and you may use the standard Info commands within it. `C-x ' (`select-visited-node') Select a node which has been previously visited in a visible window. This is similar to `C-x C-b' followed by `m', but no window is created. File: info-stnd.info, Node: Searching Commands, Next: Xref Commands, Prev: Node Commands, Up: Top Searching an Info File ********************** GNU Info allows you to search for a sequence of characters throughout an entire Info file, search through the indices of an Info file, or find areas within an Info file which discuss a particular topic. <s> (`search') </> Read a string in the echo area and search for it. If the string includes upper-case characters, the Info file is searched case-sensitively; otherwise Info ignores the letter case. With a numeric argument of N, search for Nth occurrence of the string. Negative arguments search backwards. <?> (`search-backward', vi-like operation) Read a string in the echo area and search backward through the Info file for that string. If the string includes upper-case characters, the Info file is searched case-sensitively; otherwise Info ignores the letter case. With a numeric argument of N, search for Nth occurrence of the string. Negative arguments search forward. <S> (`search-case-sensitively' Read a string in the echo area and search for it case-sensitively, even if the string includes only lower-case letters. With a numeric argument of N, search for Nth occurrence of the string. Negative arguments search backwards. `C-x <n>' (`search-next') <n>, vi-like operation Search for the same string used in the last search command, in the same direction, and with the same case-sensitivity option. With a numeric argument of N, search for Nth next occurrence. `C-x <N>' (`search-previous') <N>, vi-like operation Search for the same string used in the last search command, and with the same case-sensitivity option, but in the reverse direction. With a numeric argument of N, search for Nth previous occurrence. <C-s> (`isearch-forward') Interactively search forward through the Info file for a string as you type it. If the string includes upper-case characters, the search is case-sensitive; otherwise Info ignores the letter case. <C-r> (`isearch-backward') Interactively search backward through the Info file for a string as you type it. If the string includes upper-case characters, the search is case-sensitive; otherwise Info ignores the letter case. (`index-search') Look up a string in the indices for this Info file, and select a node where the found index entry points to. <,> (`next-index-match') Move to the node containing the next matching index item from the last `i' command. The most basic searching command is `s' or `/' (`search'). The `s' command prompts you for a string in the echo area, and then searches the remainder of the Info file for an occurrence of that string. If the string is found, the node containing it is selected, and the cursor is left positioned at the start of the found string. Subsequent `s' commands show you the default search string within `[' and `]'; pressing <RET> instead of typing a new string will use the default search string. Under `--vi-keys' (*note --vi-keys::), using the `n' or `N' commands is a faster way of searching for the same string. "Incremental searching" is similar to basic searching, but the string is looked up while you are typing it, instead of waiting until the entire search string has been specified. Both incremental and non-incremental search by default ignore the case of letters when comparing the Info file text with the search string. However, an uppercase letter in the search string makes the search case-sensitive. You can force a case-sensitive non-incremental search, even for a string that includes only lower-case letters, by using the `S' command (`search-case-sensitively'). The `n' and `N' commands operate case-sensitively if the last search command was `S'. File: info-stnd.info, Node: Xref Commands, Next: Window Commands, Prev: Searching Commands, Up: Top Selecting Cross References ************************** We have already discussed the `Next', `Prev', and `Up' pointers which appear at the top of a node. In addition to these pointers, a node may contain other pointers which refer you to a different node, perhaps in another Info file. Such pointers are called "cross references", or "xrefs" for short. * Menu: * Parts of an Xref:: What a cross reference is made of. * Selecting Xrefs:: Commands for selecting menu or note items. File: info-stnd.info, Node: Parts of an Xref, Next: Selecting Xrefs, Up: Xref Commands Parts of an Xref ================ Cross references have two major parts: the first part is called the "label"; it is the name that you can use to refer to the cross reference, and the second is the "target"; it is the full name of the node that the cross reference points to. The target is separated from the label by a colon `:'; first the label appears, and then the target. For example, in the sample menu cross reference below, the single colon separates the label from the target. * Foo Label: Foo Target. More information about Foo. Note the `.' which ends the name of the target. The `.' is not part of the target; it serves only to let Info know where the target name ends. A shorthand way of specifying references allows two adjacent colons to stand for a target name which is the same as the label name: * Foo Commands:: Commands pertaining to Foo. In the above example, the name of the target is the same as the name of the label, in this case `Foo Commands'. You will normally see two types of cross reference while viewing nodes: "menu" references, and "note" references. Menu references appear within a node's menu; they begin with a `*' at the beginning of a line, and continue with a label, a target, and a comment which describes what the contents of the node pointed to contains. Note references appear within the body of the node text; they begin with `*Note', and continue with a label and a target. Like `Next', `Prev', and `Up' pointers, cross references can point to any valid node. They are used to refer you to a place where more detailed information can be found on a particular subject. Here is a cross reference which points to a node within the Texinfo documentation: *Note Writing an Xref: (texinfo)xref, for more information on creating your own texinfo cross references. File: info-stnd.info, Node: Selecting Xrefs, Prev: Parts of an Xref, Up: Xref Commands Selecting Xrefs =============== The following table lists the Info commands which operate on menu items. <1> (`menu-digit') <2> ... <9> <M-1>, vi-like operation <M-2> ... <M-9>, vi-like operation Within an Info window, pressing a single digit, (such as `1'), selects that menu item, and places its node in the current window. For convenience, there is one exception; pressing `0' selects the _last_ item in the node's menu. When `--vi-keys' is in effect, digits set the numeric argument, so these commands are remapped to their `M-' varieties. For example, to select the last menu item, press <M-0>. <0> (`last-menu-item') <M-0>, vi-like operation Select the last item in the current node's menu. <m> (`menu-item') Reads the name of a menu item in the echo area and selects its node. Completion is available while reading the menu label. *Note completion: The Echo Area. `M-x find-menu' Move the cursor to the start of this node's menu. This table lists the Info commands which operate on cross references. <f> (`xref-item') <r> <M-f>, vi-like operation `C-x <r>', vi-like operation Reads the name of a note cross reference in the echo area and selects its node. Completion is available while reading the cross reference label. *Note completion: The Echo Area. Finally, the next few commands operate on menu or note references alike: <TAB> (`move-to-next-xref') Move the cursor to the start of the next nearest menu item or note reference in this node. You can then use <RET> (`select-reference-this-line') to select the menu or note reference. <M-TAB> (`move-to-prev-xref') <Shift-<TAB>> (on DOS/Windows only) Move the cursor the start of the nearest previous menu item or note reference in this node. On DOS/Windows only, the `Shift-<TAB>' key is an alias for `M-<TAB>'. This key is sometimes called `BackTab'. <RET> (`select-reference-this-line') <M-g>, vi-like operation Select the menu item or note reference appearing on this line. File: info-stnd.info, Node: Window Commands, Next: Printing Nodes, Prev: Xref Commands, Up: Top Manipulating Multiple Windows ***************************** A "window" is a place to show the text of a node. Windows have a view area where the text of the node is displayed, and an associated "mode line", which briefly describes the node being viewed. GNU Info supports multiple windows appearing in a single screen; each window is separated from the next by its modeline. At any time, there is only one "active" window, that is, the window in which the cursor appears. There are commands available for creating windows, changing the size of windows, selecting which window is active, and for deleting windows. * Menu: * The Mode Line:: What appears in the mode line? * Basic Windows:: Manipulating windows in Info. * The Echo Area:: Used for displaying errors and reading input. File: info-stnd.info, Node: The Mode Line, Next: Basic Windows, Up: Window Commands The Mode Line ============= A "mode line" is a line of inverse video which appears at the bottom of an Info window. It describes the contents of the window just above it; this information includes the name of the file and node appearing in that window, the number of screen lines it takes to display the node, and the percentage of text that is above the top of the window. It can also tell you if the indirect tags table for this Info file needs to be updated, and whether or not the Info file was compressed when stored on disk. Here is a sample mode line for a window containing an uncompressed file named `dir', showing the node `Top'. -----Info: (dir)Top, 40 lines --Top------------------------------------- ^^ ^ ^^^ ^^ (file)Node #lines where When a node comes from a file which is compressed on disk, this is indicated in the mode line with two small `z''s. In addition, if the Info file containing the node has been split into subfiles, the name of the subfile containing the node appears in the modeline as well: --zz-Info: (emacs)Top, 291 lines --Top-- Subfile: emacs-1.Z------------- Truncation of long lines (as opposed to wrapping them to the next display line, *note toggle-wrap: Scrolling Commands.) is indicated by a `$' at the left edge of the mode line: --$--Info: (texinfo)Top, 480 lines --Top-- Subfile: texinfo-1----------- When Info makes a node internally, such that there is no corresponding info file on disk, the name of the node is surrounded by asterisks (`*'). The name itself tells you what the contents of the window are; the sample mode line below shows an internally constructed node showing possible completions: -----Info: *Completions*, 7 lines --All--------------------------------- File: info-stnd.info, Node: Basic Windows, Next: The Echo Area, Prev: The Mode Line, Up: Window Commands Window Commands =============== It can be convenient to view more than one node at a time. To allow this, Info can display more than one "window". Each window has its own mode line (*note The Mode Line::) and history of nodes viewed in that window (*note `history-node': Node Commands.). `C-x <o>' (`next-window') Select the next window on the screen. Note that the echo area can only be selected if it is already in use, and you have left it temporarily. Normally, `C-x o' simply moves the cursor into the next window on the screen, or if you are already within the last window, into the first window on the screen. Given a numeric argument, `C-x o' moves over that many windows. A negative argument causes `C-x o' to select the previous window on the screen. `M-x prev-window' Select the previous window on the screen. This is identical to `C-x o' with a negative argument. `C-x <2>' (`split-window') Split the current window into two windows, both showing the same node. Each window is one half the size of the original window, and the cursor remains in the original window. The variable `automatic-tiling' can cause all of the windows on the screen to be resized for you automatically, please *note automatic-tiling: Variables. for more information. `C-x <0>' (`delete-window') Delete the current window from the screen. If you have made too many windows and your screen appears cluttered, this is the way to get rid of some of them. `C-x <1>' (`keep-one-window') Delete all of the windows excepting the current one. `ESC <C-v>' (`scroll-other-window') Scroll the other window, in the same fashion that `C-v' might scroll the current window. Given a negative argument, scroll the "other" window backward. `C-x <^>' (`grow-window') Grow (or shrink) the current window. Given a numeric argument, grow the current window that many lines; with a negative numeric argument, shrink the window instead. `C-x <t>' (`tile-windows') Divide the available screen space among all of the visible windows. Each window is given an equal portion of the screen in which to display its contents. The variable `automatic-tiling' can cause `tile-windows' to be called when a window is created or deleted. *Note `automatic-tiling': Variables. File: info-stnd.info, Node: The Echo Area, Prev: Basic Windows, Up: Window Commands The Echo Area ============= The "echo area" is a one line window which appears at the bottom of the screen. It is used to display informative or error messages, and to read lines of input from you when that is necessary. Almost all of the commands available in the echo area are identical to their Emacs counterparts, so please refer to that documentation for greater depth of discussion on the concepts of editing a line of text. The following table briefly lists the commands that are available while input is being read in the echo area: <C-f> (`echo-area-forward') <RIGHT> (an arrow key) <M-h>, vi-like operation Move forward a character. <C-b> (`echo-area-backward') <LEFT> (an arrow key) <M-l>, vi-like operation Move backward a character. <C-a> (`echo-area-beg-of-line') <M-0>, vi-like operation Move to the start of the input line. <C-e> (`echo-area-end-of-line') <M-$>, vi-like operation Move to the end of the input line. <M-f> (`echo-area-forward-word') <C-<RIGHT>> (DOS/Windows only) <M-w>, vi-like operation Move forward a word. On DOS/Windows, `C-<RIGHT>' moves forward by words. <M-b> (`echo-area-backward-word') <C-<LEFT>> (DOS/Windows only) Move backward a word. On DOS/Windows, `C-<LEFT>' moves backward by words. <C-d> (`echo-area-delete') <M-x>, vi-like operation Delete the character under the cursor. <DEL> (`echo-area-rubout') Delete the character behind the cursor. On some keyboards, this key is designated <BS>, for `BackSpace'. Those keyboards will usually bind <DEL> in the echo area to `echo-area-delete'. <C-g> (`echo-area-abort') <C-u>, vi-like operation Cancel or quit the current operation. If completion is being read, this command discards the text of the input line which does not match any completion. If the input line is empty, it aborts the calling function. <RET> (`echo-area-newline') Accept (or forces completion of) the current input line. <C-q> (`echo-area-quoted-insert') <C-v>, vi-like operation Insert the next character verbatim. This is how you can insert control characters into a search string, for example, or the `?' character when Info prompts with completion. PRINTING CHARACTER (`echo-area-insert') Insert the character. Characters that have their 8th bit set, and not bound to `M-' commands, are also inserted verbatim; this is useful for terminals which support Latin scripts. <M-TAB> (`echo-area-tab-insert') <Shift-<TAB>> (on DOS/Windows only) Insert a TAB character. On DOS/Windows only, the `Shift-<TAB>' key is an alias for `M-<TAB>'. This key is sometimes called `BackTab'. <C-t> (`echo-area-transpose-chars') Transpose the characters at the cursor. The next group of commands deal with "killing", and "yanking" text(1). For an in depth discussion of killing and yanking, *note Killing and Deleting: (emacs)Killing. <M-d> (`echo-area-kill-word') <M-X>, vi-like operation Kill the word following the cursor. <M-DEL> (`echo-area-backward-kill-word') <M-<BS>> Kill the word preceding the cursor. On some keyboards, the `Backspace' key is used instead of `DEL', so `M-<Backspace>' has the same effect as `M-<DEL>'. <C-k> (`echo-area-kill-line') Kill the text from the cursor to the end of the line. `C-x <DEL>' (`echo-area-backward-kill-line') Kill the text from the cursor to the beginning of the line. <C-y> (`echo-area-yank') Yank back the contents of the last kill. <M-y> (`echo-area-yank-pop') Yank back a previous kill, removing the last yanked text first. Sometimes when reading input in the echo area, the command that needed input will only accept one of a list of several choices. The choices represent the "possible completions", and you must respond with one of them. Since there are a limited number of responses you can make, Info allows you to abbreviate what you type, only typing as much of the response as is necessary to uniquely identify it. In addition, you can request Info to fill in as much of the response as is possible; this is called "completion". The following commands are available when completing in the echo area: <TAB> (`echo-area-complete') <SPC> Insert as much of a completion as is possible. <?> (`echo-area-possible-completions') Display a window containing a list of the possible completions of what you have typed so far. For example, if the available choices are: bar foliate food forget and you have typed an `f', followed by `?', Info will pop up a window showing a node called `*Completions*' which lists the possible completions like this: 3 completions: foliate food forget i.e., all of the choices which begin with `f'. Pressing <SPC> or <TAB> would result in `fo' appearing in the echo area, since all of the choices which begin with `f' continue with `o'. Now, typing `l' followed by `TAB' results in `foliate' appearing in the echo area, since that is the only choice which begins with `fol'. <ESC C-v> (`echo-area-scroll-completions-window') Scroll the completions window, if that is visible, or the "other" window if not. ---------- Footnotes ---------- (1) Some people are used to calling these operations "cut" and "paste", respectively. File: info-stnd.info, Node: Printing Nodes, Next: Miscellaneous Commands, Prev: Window Commands, Up: Top Printing Out Nodes ****************** In general, we recommend that you use TeX to format the document and print sections of it, by running `tex' on the Texinfo source file. However, you may wish to print out the contents of a node as a quick reference document for later use, or if you don't have TeX installed. Info provides you with a command for doing this. `M-x print-node' Pipe the contents of the current node through the command in the environment variable `INFO_PRINT_COMMAND'. If the variable does not exist, the node is simply piped to `lpr' (on DOS/Windows, the default is to print the node to the local printer device, `PRN'). The value of `INFO_PRINT_COMMAND' may begin with the `>' character, as in `>/dev/printer', in which case Info treats the rest as the name of a file or a device. Instead of piping to a command, Info opens the file, writes the node contents, and closes the file, under the assumption that text written to that file will be printed by the underlying OS.